Your Cart is Empty
MS Gold Flex- Hardwood Floor Adhesive
HIGH-PERFORMANCE MONOCOMPONENT MS ADHESIVE FOR FULL SPREAD GLUE DOWN OF HARDWOOD FLOORS.
100% Made in Italy. The gold standard for full-spread glue down application, with an added moisture barrier!
Monocomponent silane adhesive, specifically for gluing all types of wood floor to concrete subfloors or nonabsorbent flooring (marble tiles, Palladian flooring and wood surfaces).
TECHNICAL CHARACTERISTICS:
• Monocomponent
• 100% MS Technology
• High yield
• High initial tack
• Suitable for gluing all kinds of wooden floors
• Free from isocyanate and amines
• Solvent-free
• Low VOC emissions
• Coverage- 180 SF per pail
• Uses Trowel No. 6 (5/16" x 3/16" x 1/2")
• IIC 67, STC 62 (ASTM E 492-09, ASTM E 90-09).
Where to apply:
- Absorbent and non-absorbent flooring
- Traditional concrete and anhydrite screeds
- Calcium sulphate screeds
- Absorbent and non-absorbent subfloors with underfloor heating or cooling systems
- Metallic surfaces (after degreasing)
- Traditional concrete and anhydrite screeds
- Calcium sulphate screeds
- Absorbent and non-absorbent subfloors with underfloor heating or cooling systems
- Metallic surfaces (after degreasing)
The following may be glued onto these surfaces:
- Non-locking 10-mm solid wood battens (lamparquet) compliant with standard DIN EN 13227
- Mosaic parquet compliant with standard DIN EN 13488
- Solid wood strip flooring (industrial) compliant with standard DIN EN 14761
- Interlocking tongue-and-groove solid wood boards with maximum width of 18 cm or 20 cm with oak veneer compliant with standard DIN EN 13226
- Finished multi-layered flooring compliant with standard DIN EN 13489
- Cork flooring compliant with standard DIN EN 12104
If applied evenly and uniformly, MS GOLD FLEX can act as a vapour barrier (by forming a continuous layer) on the aforementioned tongue-and-groove parquet only, and unheated bases with a moisture content up to 4%, corresponding to environmental humidity
